Products
Technical products for MV/LV electrical infrastructure.
Capacitive Voltage IndicatorCDS Series
When compact LED voltage presence indication is needed in MV switchgear, we specify the CDS Series. CDS covers simple local indication, while CDS-R adds a change-over contact for operation-safe signalling, SCADA input or external lamp applications.
Capacitive Voltage IndicatorOVI+ Series
When LCD-based voltage presence indication is needed in MV switchgear, we specify the OVI+ Series. OVI+ covers compact local indication, while OVI+R, OVI+S and OVI+SR add relay contacts, display test and operation-safe signalling options according to the project requirement.
Capacitive Voltage IndicatorPhase-Sync
When two MV network sections must be synchronized before paralleling (or when the existing OVI+ system needs field testing), the Phase-Sync is what we specify. It works with both LRM and HR capacitive voltage indicator systems and complies with IEC 62271-215 for phase comparison applications.
Capacitor Duty ContactorC24
When capacitor banks are switched frequently in automatic PFC systems, capacitor duty contactors are what we specify instead of standard power contactors. EPCOS C24 series contactors are designed with pre-charge contacts and built-in damping resistors to limit inrush current and extend capacitor and contactor service life.
Energy AnalyzerUMG 96-EL
When the requirement is straightforward energy measurement and logging in a 96mm panel device (without the need for advanced power quality functions), the UMG 96-EL is what we specify. It supports MQTT communication making it suitable for IoT-connected energy monitoring applications.
Fault Passage IndicatorF-Sense
When a DSO needs to reduce fault location time in MV cable networks (and SCADA integration is a requirement), F-Sense is what we specify. It detects fault current passage and reports the affected section remotely, cutting restoration time from hours to minutes.
Fault Passage IndicatorF-Sense Lite
When fault location improvement is needed but remote SCADA reporting is not a requirement, the F-Sense Lite is what we specify. It provides local fault passage indication in MV cable networks, helping field crews identify the faulted section without remote communication infrastructure.
Ferroresonance ProtectionFerro-Damp
When voltage transformers are installed in an MV network with isolated neutral and single-phase switching is possible, ferroresonance is a real risk. Ferro-Damp is what we specify in these cases. It activates only when ferroresonance is detected and damps the overvoltage before equipment damage occurs.
Network AnalyzerUMG 509-PRO
When power quality analysis with integrated residual current monitoring is needed in a panel-mounted device (and the application does not require Class A certification), the UMG 509-PRO is what we specify. It measures harmonics to the 63rd, supports multiple communication protocols and includes a web server for browser-based access without additional software.
Network AnalyzerUMG 512-PRO
When the application requires Class A certified power quality measurement (for example at the point of common coupling in a DSO network, in a data center, or for energy dispute resolution), the UMG 512-PRO is what we specify. It measures all PQ parameters to IEC 61000-4-30 Class A with integrated RCM and supports EN 50160 compliance reporting via GridVis software.
Network AnalyzerUMG 605-PRO
When power quality monitoring is needed at the incoming supply of a large industrial or commercial facility (with a DIN rail form factor and a wide range of I/O and communication options), the UMG 605-PRO is what we specify. It combines Class S power quality measurement with energy management functions and direct SCADA integration.
Network AnalyzerUMG 800
When a large industrial facility or data center requires centralized power quality monitoring across multiple measurement points (with a modular architecture that can expand to cover current, RCM and temperature channels), the UMG 800 is what we specify. Its 4GB memory and modular I/O make it suitable for long-term energy management projects.
Network AnalyzerUMG 801
When a facility requires the UMG 800 modular measurement architecture plus direct integration into SCADA or building management systems via OPC UA, the UMG 801 is what we specify. It enables transparent data transfer from the measurement level to ERP systems without additional gateways.
Network AnalyzerUMG 96-PA
When energy management, power quality control and residual current monitoring are all required in a single 96mm panel device, the UMG 96-PA is what we specify. It supports modular expansion and covers applications from building installations to industrial distribution boards.
Network AnalyzerUMG 96-PQ-L
When power quality analysis with modular expandability is needed in a 96mm panel device (especially in retrofit applications where space is constrained), the UMG 96-PQ-L is what we specify. The LP variant adds low-power measurement capability for LPCT-connected installations.
Network AnalyzerUMG 96-RM
When a multifunctional panel analyzer is needed for LV and MV distribution systems (with harmonics measurement up to the 40th and a range of communication and I/O options), the UMG 96-RM series is what we specify. Six variants cover everything from basic RS485 output to Profibus, BACnet, Ethernet and RCM-enabled configurations.
Power Factor ControllerBR6000
When an automatic PFC panel requires intelligent multi-stage control with 6 or 12 stages, the BR6000 is what we specify. It offers relay outputs for conventional switching or thyristor outputs (BR6000-T) for dynamic fast switching under 20ms. The mixed BR6000-T6R6 variant combines both in a single controller, covering standard and dynamic loads in one panel.
Power Factor ControllerBR604
When a small automatic PFC panel needs a simple 4-stage controller at low cost, the BR604 is what we specify. It handles basic reactive power compensation tasks with 4 relay outputs, covers standard single-phase measurement and fits the same 138x138mm panel cutout as the larger BR6000 and BR7000 controllers.
Power Factor ControllerBR7000
When an automatic PFC system requires true 3-phase measurement, up to 15 switching stages and a wider supply voltage range up to 440V, the BR7000 is what we specify. It is suitable for MV metering applications with external voltage transformers and supports single-phase balancing control, making it the most capable controller in the EPCOS range.
Power Factor Correction CapacitorPhaseCap Compact
When panel space is constrained and a compact cylindrical capacitor is needed for automatic PFC banks, PhaseCap Compact is what we specify. With diameters of only 116 and 136mm it fits in space-saving enclosures while delivering up to 33 kVAr and tolerating inrush currents up to 400 times rated current.
Power Factor Correction CapacitorPhaseCap Energy Plus
When maximum service life and highest inrush current capability are required in demanding automatic PFC applications, PhaseCap Energy Plus is what we specify. With up to 240,000 hours service life, 500 times rated inrush current tolerance and outputs up to 60 kVAr, it is the most robust capacitor in the EPCOS/TDK range. Available in gas (HD) and biodegradable resin (SHD) versions.
Power Factor Correction CapacitorPhaseCap HD
When automatic power factor correction banks require heavy duty capacitors with high inrush current capability and long service life, PhaseCap HD is what we specify. Based on proven MKK technology with concentric windings, it withstands up to 300 times rated inrush current and is rated for up to 10,000 switching operations per year.
Power Factor Correction CapacitorPhiCap
When fixed or automatic power factor correction is needed in industrial LV networks using cylindrical can capacitors, PhiCap is what we specify. Manufactured with metalized polypropylene film in aluminium housings, the series covers single-phase and three-phase configurations from 1 to 30 kVAr and voltage ranges from 440 to 525V.
Protection RelayPowerLogic P1 Series
When essential feeder, voltage, or frequency protection is needed in a compact and cost-effective platform, the PowerLogic P1 Series is what we specify. P1F handles feeder, incomer, and transformer backup protection, while P1V covers busbar voltage, frequency, generator interface, and load-shedding supervision. Both share the same flush-mounted case, with CT or LPCT options and RS485 communication available on selected models, making the series a strong fit for retrofitting older electromechanical relays as well as new installations with limited panel space.
Protection RelayPowerLogic P3 Series
When standard or advanced MV protection is needed across feeder, motor, generator, or transformer applications, the PowerLogic P3 Series is what we specify. P3 Standard (P3U20, P3U30) covers essential to directional feeder and motor protection, while P3 Advanced adds dedicated models for line differential (P3L30), motor differential (P3M32), generator (P3G30/P3G32), and transformer differential (P3T32) protection, all with IEC 61850 Edition 1/Edition 2 and optional LPCT/LPVT sensor support.
Protection RelayPowerLogic P5 Series
When demanding MV protection or bay control is needed with a withdrawable, modular platform, the PowerLogic P5 Series is what we specify. The compact P5x20 covers voltage/frequency (P5V20) and universal current-based protection (P5U20, in CT or LPCT/LPVT versions), while the expanded P5x30 adds directional feeder (P5F30), motor (P5M30), transformer differential (P5T30), and line differential (P5L30) models with up to 6 arc-flash point sensors and redundant Ethernet. Both platforms support IEC 61850 and are the current reference platform for Sepam and MiCOM modernization under Schneider's ECOFIT approach.
Protection RelayPowerLogic P7
When a high-flexibility, modular platform is needed for demanding protection and control applications, such as primary substations or critical infrastructure, PowerLogic P7 is what we specify. Application packages cover feeder, motor, generator, transformer, line differential, busbar differential, stand-alone merging unit, and bay control, all built on the same scalable hardware with up to 104 digital inputs, IEC 61850 Edition 2.1, and advanced cybersecurity features.
Protection RelayRelion 605 Series
When compact and straightforward protection is required for standard feeder or motor applications, the ABB Relion 605 Series provides ready-made REF601 and REM601 configurations with RS485 communication.
Protection RelayRelion 615 Series
When application-specific protection is required for feeders, motors, two-winding transformers or two-terminal lines, ABB Relion 615 Series provides REF615, REM615, RET615 and RED615 on a common plug-in platform.
Protection RelayRelion 630 Series
ABB Relion 630 Series covers comprehensive feeder, transformer, motor and generator protection, control and measurement with REF630, RET630, REM630 and REG630. Availability must be confirmed per project.
Protection RelayREX615
When one modular relay must cover changing feeder, transformer, line, motor, generator, busbar, capacitor and voltage applications, ABB REX615 combines selectable application packages on one scalable platform.
Protection RelaySepam Series
When an existing Sepam relay needs maintenance, spare parts, or modernization rather than being part of a new installation, this is where we help. Sepam S, M, T, G, and B cover feeder, motor, transformer, generator, and busbar/capacitor bank applications across existing MV installations, and we evaluate the active protection functions, I/O, communication, and panel dimensions of your specific relay to recommend a suitable PowerLogic P1, P3, or P5 replacement.
Residual Current MonitorRCM-202-AB
When early detection of insulation degradation is required (before it leads to equipment failure, fire or nuisance tripping), the RCM-202-AB is what we specify. It monitors residual currents continuously at up to two measurement points and integrates with GridVis software for alarm management and trend analysis.
Separable Connector400TB / 440TB Series
When a screened, symmetrical separable connector is needed to terminate polymeric-insulated MV cables onto Interface C bushings (for gas-insulated switchgear, transformers, or motors up to 42 kV), the Nexans Euromold 400TB and 440TB series is what we specify. The 400TB family covers 16–300 mm² conductors across the 12–42 kV range, while the heavier-duty 440TB family extends up to 630 mm² conductors across the same voltage range.
Separable Connector480TB / 484TB / 489TB Series
When a compact, asymmetric separable connector is needed for the same Interface C bushings as the 400TB/440TB symmetrical range, but across a wider conductor range, the Nexans Euromold 480TB, 484TB, and 489TB series is what we specify. Together they span 16 mm² up to 1200 mm² conductors across the 12–42 kV range.
Separable ConnectorCB Series
When an asymmetric elbow/T-type separable connector is needed across a wide current range (630 A up to 1250 A) for polymeric or XLPE-insulated MV cables up to 42 kV, the NKT CB Series is what we specify. Five models cover 25 mm² up to 1200 mm² conductors, with both onshore and offshore variants available.
Separable ConnectorRSTI-39xx / 58xx / 59xx / 68xx / 69xx Series
When a screened separable T-connector is needed across a wide voltage and current range (12 kV up to 42 kV, 800 A up to 1250 A) for single- and three-core polymeric-insulated MV cables onto Interface C bushings, TE's Raychem RSTI series is what we specify. The line spans standard-bore models (25 mm²) through large cross-section variants (1000 mm²), all built on one silicone-rubber screened body design.
SoftwareGridVis
When Janitza measurement devices are deployed and a centralized platform is needed for data visualization, EN 50160 compliance reporting, alarm management and energy analysis, GridVis is what we specify alongside the hardware. It runs as desktop or service installation and connects to all Janitza UMG devices via Ethernet or RS485.
Temperature & Humidity ControllerTHC-100D / THC-102 / THC-202
When condensation, partial-discharge risk and surface-flashover risk must be controlled inside switchgear panels or electrical enclosures, the THC-100D, THC-102 and THC-202 controllers are what we specify. They monitor temperature and relative humidity and activate enclosure-heater control when the temperature falls or humidity rises.
Temperature & Humidity ControllerTHC-303
When a larger or more complex enclosure requires monitoring across multiple zones with independent threshold control per zone, the THC-303 is what we specify. It supports multiple sensor inputs and relay outputs, making it suitable for large MV panels or switchrooms with separate compartments.
Voltage SensorsLPVT AIS
Support-type LPVT for AIS busbars, available for 36 kV, 24 kV, and 12 kV systems.
Voltage SensorsLPVT GIS Asymmetrical
Cone-type LPVT for GIS with asymmetric T-connectors, available for 36 kV, 24 kV, and 12 kV systems.
Voltage SensorsLPVT GIS Symmetrical
Cone-type LPVT for GIS with symmetric T-connectors, available for 36 kV, 24 kV, and 12 kV systems.
Voltage Signal AmplifierV-Mate
LPVTs and voltage sensors are designed to provide accurate and stable low-level voltage signals for measurement, protection, and power quality applications. V-Mate amplifies the low-level signal obtained from LPVTs and voltage sensors to levels suitable for the input requirements of power quality recorders, protection devices, and other measurement equipment, without introducing phase shift or compromising measurement accuracy. This ensures reliable signal transmission while maintaining measurement performance in accordance with IEC 61869-1 and IEC 61869-11.